A typical field of application for VACUCLEAN systems is the removal of plastics from tools and machine parts. In the plastics and recycling industry, this includes in particular laser filters, filters and granulating nozzles and discs as well as die plates or extruder screws. With Schwing's environmentally friendly, energy-efficient and effective systems, all plastics and recyclates can be removed quickly, safely and cost-effectively.
Application example: Removal of recycled PET from filters
Recycled PET (rPET) is increasingly being used to produce fruit and vegetable trays – circular packaging is the buzzword here. Metal filters used in the production processes of large manufacturing plants have to be changed daily, partially replaced each shift, and the rPET residues must be removed from machine parts. "Our packaging customers use our particularly gentle and environmentally friendly vacuum pyrolysis technology to clean these filters," explains Virgilio Perez Guembe, thermal cleaning expert from Schwing Technologies. Unlike lengthy manual procedures, this fully automated process only takes about eight to ten hours. "Our VACUCLEAN systems clean quickly and in a single operation, which saves not only time but manpower as well," emphasizes Perez Guembe, pointing out that users also benefit from optimized digital networkability of the systems.
Short cleaning times for Spanish packaging manufacturer
Examples of these applications are approximately 85 by 35 cm metal filters, which are used in the manufacturing process of fruit and vegetable trays. The producer, a Spanish packaging manufacturer, works with rPET. The company cleans its filters daily, using vacuum pyrolysis technology and Schwing’s special expertise in cleaning. Technical factors such as the cleaning time, vacuum atmosphere, exact temperature curve and maximum temperature of the entire process were specifically tailored to the filter systems and this user’s rPET. “To accelerate the cleaning process even further, we also made a loading basket for our customers that was specially adapted to the dimensions of their filters," reports Schwing’s expert.
Environmentally friendly cleaning process in the vacuum pyrolysis system
Cleaning takes place in an electrically heated vacuum cleaning chamber, where the temperature is measured directly at the filter. Perez Guembe describes the environmentally friendly cleaning process as follows: “So that a large part of the rPET can initially melt and flow out, the system heats up slowly and is gentle on the materials. The actual pyrolysis process that decomposes the rest of the polymer only starts at around 440 degrees Celsius.” Remaining carbon is removed by a subsequent oxidation phase at around 450 degrees Celsius. All of this happens fully automatically and leaves almost no residue. If necessary, the last inorganic residues are removed manually with compressed air.
Digital integration of the VACUCLEAN cleaning system
To digitally optimize the fully automatic cleaning process, the Schwing development team has improved the thermal vacuum pyrolysis system with several new components. In addition to a new touchscreen panel with network connection, the digital components include an internal data connection for data logging and digital system documentation in the Schwing cloud. Further technical innovations include fully electronic flow measurement for catalyst supply air, a process signal lamp, and a revised fault reporting concept. "All of these measures significantly reduce cleaning times, which is particularly important for our customers in the plastics and recycling industry," says Perez Guembe.
Keywords: Equiplast, plastics recycling, circular economy, thermal cleaning, vacuum pyrolysis, vacuum pyrolysis technology, VACUCLEAN, PET removal, recycled PET, rPET, circular packaging, packaging industry, food packaging
About Schwing Technologies
Schwing Technologies has been operating for over 50 years and is the worldwide technological leader for high-temperature systems for thermal cleaning, thermo-chemical finishing and heat treatment of metal parts and tools. Managing directors are Ewald Schwing, Thomas Schwing and Alfred Schillert. The owner-managed company designs, manufactures, and operates systems at its headquarters in Neukirchen-Vluyn in Germany's Lower Rhine region. Built upon the achievements of German engineering, the medium-sized business is one of the world's best-known specialists in the removal of plastics. Among Schwing’s approximately 3,000 international clients are companies from the plastics and fiber industries, as well as from the chemicals and automobile sectors. For every cleaning need, the company with its approximately 100 employees offers the most economically, ecologically and qualitatively best technology and cleaning solution. Schwing is also a reliable service partner for contract cleaning by processing more than 250,000 tools and parts each year to the highest environmental and qualitative standards. Founded in 1969, the company celebrates its 50th anniversary in 2019 and opened Schwing Technologies North America Inc., a new sales company in the USA, in that year.
Press contact
Alexandra Schönberger
SCHWING Technologies GmbH
Oderstraße 7
47506 Neukirchen-Vluyn, Germany
M +49 173 9774780
T +49 2845 930 146
redaktion@schwing-tech.com
www.schwing-technologies.com
Facebook: schwing.technologies
Twitter: SCHWING_TECH
LinkedIn: SCHWING Technologies GmbH
YouTube: ThermalCleaning